Property:Has input notes
This is a property of type Text.
J
Non-HDCP sources only +
0.5–2.0 Vp-p 75Ω +
HD input for Hi-vision baseband signals (Y: 0.7 Vp-p 75Ω, PB/PR: ±0.35 V 75Ω, ternary in sync). Audio: -8 dBs, 50 kΩ (RCA). +
Y: 0.8–1.2 Vp-p 75Ω, C: 0.2–0.4 Vp-p 75Ω +
HD input, supports 1080i/1035i (1125/60) +
1.0Vp-p, 75Ω, negative sync, auto-termination. Bridged output on BNC. Accepts NTSC (3.58 MHz), PAL (4.43 MHz), and B/W (50Hz/60Hz) signals. +
Dual SDI inputs compatible with 480/60i and 576/50i signals. SMPTE 259M (525 line), ITU-R BT.656 (525/625 line). Supports embedded audio per SMPTE 272M. Switched output on BNC × 1. Two RCA audio outputs provide de-embedded analog audio (CH1 and CH2). +
1.0Vp-p, 75Ω, negative sync, auto-termination. Bridged output on BNC. Accepts NTSC (3.58 MHz), PAL (4.43 MHz), and B/W (50Hz/60Hz) signals. +
BNC in + loop-through (bridge connection) +
BNC in + loop-through (bridge connection). Switched with Y/C input. +
4-pin; bridge connection (loop-through). Switched with Video B input. +
Built-in serial digital interface, SMPTE 259M compliant. Active loop-through output. +
S-VHS input with separate luminance and chrominance circuits. +
One of two composite source inputs. +
One of two composite source inputs. +
Digital RGB (CGA/TTL) +
BNC in + loop-through (bridge connection) +
Built-in serial digital interface, SMPTE 259M compliant. Active loop-through output. +
BNC in + loop-through (bridge connection) +
BNC in + loop-through with 75-ohm termination switch +
