Property:Has input notes
This is a property of type Text.
J
Also accepts RGBS input +
Supports 625p, 525p, and 1125i signals +
Also accepts S-Video input +
Also accepts S-Video and RGBS. T-V LINK compatible. +
75-ohm antenna input +
Also has S-Video input via Mini-DIN-4 +
Supports 625p, 525p, and 1125i signals +
Also accepts S-Video input +
Also has S-Video input via Mini-DIN-4 +
Also accepts RGBS input +
75-ohm antenna input +
Also accepts S-Video and RGBS. T-V LINK compatible. +
S-VHS Y/C input mode, selected via Y/C INPUT switch behind front panel. Y = 1.0 Vp-p with sync, C = 0.286 Vp-p (burst level) at 3.58 MHz, 75 ohms. Connect to 7-pin Y/C output of S-VHS VTR. +
U-matic DUB input mode, selected via Y/C INPUT switch behind front panel. Y = 1.0 Vp-p with sync, C = 0.50 Vp-p at 688 kHz, 75 ohms. Connect to DUB output of 3/4" U-format VCR. +
Analog component Y/R-Y/B-Y input via three BNC connectors. Y: 0.7V video + 0.3V sync (1.0 Vp-p total), 75 ohms; R-Y and B-Y: 0.7 Vp-p at 100% colour bars (0.486 Vp-p at 75%), 75 ohms. +
Dropout compensator RF carrier input, 3–10 MHz, 0.2–1.0 Vp-p, 75 ohms. Connect to VTR's reproduced RF signal output (DOC OUT). Do not connect to TV output RF converter. +
Composite video (VBS) input, 1.0 Vp-p, 75 ohms. +
Black burst (0.45 Vp-p) or composite video (1.0 Vp-p) reference input. Two BNC connectors configured as loopthrough. Unused connector should be terminated with 75-ohm plug (included). +
HD-SDI/SD-SDI input, SMPTE 292M/259M compliant +
HD-SDI/SD-SDI input, SMPTE 292M/259M-C compliant, embedded audio supported +
