Property:Input notes
This is a property of type Text.
D
Separate sync input for RGB mode. +
Analog RGB input via Y/G, R-Y/R, B-Y/B, and Sync BNC connectors. Shared connectors with component input mode. +
U-matic DUB input at 688 kHz color-under frequency. Accepts color-under signal directly from U-matic VTR DUB connectors. +
Component video via Y/G, R-Y/R, and B-Y/B BNC connectors. Supports Betacam and MII level standards. Shared connectors with RGB input mode. +
Reference video input. Accepts color black for synchronizer mode operation. +
Single loop-through composite video input feeding all four framestores. +
1V p-p, 75Ω terminated +
Y: 1V p-p, 75Ω; C: 286mV burst, 75Ω +
Color black reference input, Hi-Z loop-through +
1V p-p, 75Ω terminated. Also serves as DUB chroma input when DUB mode is selected. +
DUB Y/C-688 luminance via 7-pin connector; DUB chroma via NTSC-2 BNC input +
Color black reference input for genlock +
E
Accepts composite video (PAL or NTSC) or tri-level sync for genlock. +
Shared multi-function connectors (select one input mode at a time). Sync on green. +
Shared multi-function connectors (select one input mode at a time). SMPTE or Beta levels supported. +
Two channels of balanced analog audio. Supports -10 dBu or +4 dBu reference levels. 24-bit quantization, 48 kHz sample rate. +
Shared multi-function connectors (select one input mode at a time). PAL or NTSC. +
Shared multi-function connectors (select one input mode at a time). PAL or NTSC. +
F
Four individually labeled BNC inputs on the rear I/O panel. Selected via front-panel SELECT buttons 1–4. +
PAL-I tuner input +
