Property:Input notes
This is a property of type Text.
M
VHF/UHF/CATV, 75 ohms unbalanced. Feeds both the ATSC and NTSC tuners. +
1 Vp-p into 75 ohms; audio 2 V RMS into more than 22 kilohms. +
Y at 1 Vp-p and C at 286 mVp-p, 75 ohms. Shares the front audio jacks with the composite input. +
Shares the rear audio input jacks with the rear composite input. +
1 Vp-p into 75 ohms; audio 2 Vrms with more than 22 kilohm input impedance. +
5 BNC connectors (R, G, B, HD, VD). HD input accepts composite sync (CSYNC) or horizontal sync; VD accepts vertical sync. Use HD alone for CSYNC operation. +
5 BNC connectors (R, G, B, HD, VD). HD input accepts composite sync (CSYNC) or horizontal sync; VD accepts vertical sync. Use HD alone for CSYNC operation. +
N
Analog RGB at 0.7 Vp-p into 75 ohms with separate TTL-level horizontal and vertical sync, either polarity. +
P
Microphone input for audio dubbing +
Microphone input for audio dubbing +
−60 dBv, 4.7 kohms, unbalanced +
+4/0/−6 dBs, 600 ohms, unbalanced; separate L and R channels +
Selected via front-panel INPUT switch (YC position). +
Y/Pb/Pr via 3 BNC connectors. Selected via front-panel INPUT switch (CMPNT/YC position). +
External reference signal input for genlock/sync. Has loop-through 75Ω termination switch. +
Selected via front-panel INPUT switch (LINE position). +
1 Vp-p, 75 ohms; audio at 500 mV RMS into 47 kilohms. Shares the input with the S-Video connector. +
480i component input, 75 ohms. Shares its jacks with the composite Video 1 input. +
Composite is fed to the Y jack of the component trio; the on-screen label switches between Component and Video 1. +
Do not connect S-Video and composite to Input 2 at the same time; signal interference will result. +
