Property:Has input notes
This is a property of type Text.
S
Betacam R-Y/Y/B-Y on the same BNC trio as RGB; the front panel selects between RGB and component. +
Composite sync is supplied on the separate EXT SYNC IN BNC (4 Vp-p, negative) with the EXT SYNC selector on. +
Automatic 75-ohm termination, released when a cable is connected to the VIDEO OUT loop-through. +
R/R-Y, G/Y and B/B-Y BNCs at 0.7 Vp-p. With EXT SYNC off the monitor locks to sync on the green channel (0.3 Vp-p, negative). +
Shares the input position with the VTR connector via the S VIDEO/VTR IN selector. Not fitted to all production runs. +
Analog RGB at 0.7 Vp-p, 75 ohms. Audio arrives on pin 13 of the same connector when pin 2 is held high. +
The H sync pin also accepts composite sync at 1 Vp-p, 75 ohms. +
Digital mode, selected by grounding pin 9. Pin 1 further selects IBM RGBI (with luminance on pin 25) or 3-bit TTL. +
Sync on green is accepted at 1 Vp-p on the green line. +
Sony 8-pin VTR connector carrying composite video and audio, internally 75-ohm terminated. A rear S VIDEO/VTR IN selector chooses between this and the S VIDEO connector. +
Loop-through to the LINE A VIDEO OUT / AUDIO OUT; a rear switch selects 75-ohm termination when the loop-through is unused. +
Loop-through to the LINE B VIDEO OUT / AUDIO OUT; a rear switch selects 75-ohm termination when the loop-through is unused. +
31.5 kHz input for native 480p signals. Bypasses the digital deinterlacing circuitry. +
15.75 kHz input for 240p/480i signals. Supports CSYNC, Sync on Green, and external sync. +
Reference input. 1.0Vp-p, 75 ohm, sync negative +
Reference input. 1.0Vp-p, 75Ω, sync negative +
Reference input. 1.0Vp-p, 75 ohm, sync negative +
3x BNC (Y/R-Y/B-Y). Y: 1.0Vp-p 75 ohm sync negative, R-Y: 0.7Vp-p, B-Y: 0.7Vp-p +
1.0Vp-p, 75 ohm, sync negative +
12-pin female Sony connector. Y/R-Y/B-Y component input +
