Digital Processing Systems DPS-210: Difference between revisions
Fix connectors (Y/C-688 → Hirose 7-pin DUB, Y/C-3.58 → Mini-DIN-4), add power specs (120V/60Hz/60W), add voltage range, add references section (via update-page on MediaWiki MCP Server) |
Update signal format from Y/C-688 to Y/C DUB color-under (via update-page on MediaWiki MCP Server) |
||
| Line 27: | Line 27: | ||
{{AV input | {{AV input | ||
|label=Y/C-688 | |label=Y/C-688 | ||
|signal=Y/C- | |signal=Y/C DUB color-under | ||
|connector=Hirose 7-pin DUB | |connector=Hirose 7-pin DUB | ||
|count=1 | |count=1 | ||
| Line 78: | Line 78: | ||
|label=Y/C-688 | |label=Y/C-688 | ||
|output_type=Video | |output_type=Video | ||
|signal=Y/C- | |signal=Y/C DUB color-under | ||
|connector=Hirose 7-pin DUB | |connector=Hirose 7-pin DUB | ||
|count=1 | |count=1 | ||
Latest revision as of 03:02, 7 February 2026
1×RGBS (BNC)
1×Component (YPbPr) (BNC)
1×S-Video (Y/C) (Mini-DIN-4)
1×Y/C DUB color-under (Hirose 7-pin DUB)
1×Y/C DUB color-under (Hirose 7-pin DUB)
1×RGBS (BNC)
1×Composite (CVBS) (BNC)
1×Component (YPbPr) (BNC)
Description
The Digital Processing Systems DPS-210 is a universal video signal transcoder designed for bi-directional format conversion between S-Video, U-matic DUB, component (Betacam/MII), and analog RGB video signals. The unit also provides an NTSC composite monitoring output, though it cannot decode composite video as an input.
The DPS-210 can be used as an interface between RGB computer graphics or animation systems and Betacam or MII recorders. It also serves as a component I/O device for non-linear editing systems. Unlike some transcoders, the DPS-210 can be configured to transcode in either direction, and can provide format transcoding and level matching for interformat tape duplication.
The rear panel provides Hirose 7-pin DUB connectors for Y/C-688 input and output, Mini-DIN-4 connectors for Y/C-3.58 (S-Video) input and output, and BNC connectors for the component/RGB connections (Y/G, R-Y/R, B-Y/B, Sync) and the NTSC composite monitoring output. The Y/G, R-Y/R, and B-Y/B connectors support both component (Betacam and MII) and RGB modes. Front panel level controls with a preset switch provide signal adjustment, and a front panel NTSC monitoring point allows signal verification.
The DPS-210 was also sold as the Panasonic UTP-2 (a re-badged version of the same unit). It was priced at $1,199.95 MSRP.
The unit is commonly used in archival and preservation workflows for U-matic transfers, where it converts the DUB signal from U-matic decks to S-Video for capture.
Photos
References
- rec.video.production Usenet discussion — Rear panel I/O details and limitations (NTSC output is monitoring only)
- Creative COW "Dub TBC" thread — Discussion of DPS-210 as transcoder, Panasonic UTP-2 as re-badged DPS-210
- VideoHelp "U-Matic capture project" thread — DPS-210 usage in U-matic archival workflows, DUB-to-S-Video conversion
- Reverb listing — Signal specifications (input/output formats)
