View source for NEC MultiSync 3FGe

{{CRT model
|brand=NEC
|model_code=MultiSync 3FGe
|variants=JC-1532VMA-2
|market=USA
|crt_type=Computer monitor
|form_factor=Standard
|screen_size_in=15
|aspect_ratio=4:3
|tube=M36KME20X
|mask_type=Shadow mask
|pitch=0.28
|deflection_angle=90
|visible_diag=14
|h_scan_min=28
|h_scan_max=50
|v_scan_min=48
|v_scan_max=94
}}
The '''NEC MultiSync 3FGe''' is a 15-inch multisync CRT computer monitor, model number JC-1532VMA-2, from NEC's FG family. It carries a 0.28 mm dot-pitch shadow-mask tube (NEC part M36KME20X) with 90-degree deflection and about 14 inches of viewable diagonal.<ref name="crtdb">[https://crtdatabase.com/crts/nec/nec-multisync-3fge NEC MultiSync 3FGe (JC-1532VMA-2)], CRT Database.</ref>

Its scan range of 28–50 kHz horizontal and 48–94 Hz vertical places it as an SVGA-class display, intended for 800 × 600 with XGA modes supported at reduced refresh rates.<ref name="crtdb" /> Video is fed over a standard analog VGA connector with separate horizontal and vertical sync.<ref name="crtdb" />

Unusually for a PC monitor of its generation, the 3FGe uses a glossy tube face with no anti-glare etching, which gives it a noticeably brighter, higher-contrast image than contemporaries.<ref name="crtdb" /> Degaussing runs automatically at power-on and can also be triggered manually.<ref name="crtdb" />

== References ==
<references />
{{CRT input
|label=Video
|signal=VGA (RGBHV)
|connector=DE-15 (VGA)
|count=1
|audio=None
|sync=HSYNC+VSYNC
|location=rear
}}
{{CRT link
|link_type=Database
|link_source=CRT Database
|link_url=https://crtdatabase.com/crts/nec/nec-multisync-3fge
}}