Property:Input notes
This is a property of type Text.
P
Selected via front-panel INPUT switch (YC position). +
Y/Pb/Pr via 3 BNC connectors. Selected via front-panel INPUT switch (CMPNT/YC position). +
External reference signal input for genlock/sync. Has loop-through 75Ω termination switch. +
Selected via front-panel INPUT switch (LINE position). +
1 Vp-p, 75 ohms; audio at 500 mV RMS into 47 kilohms. Shares the input with the S-Video connector. +
480i component input, 75 ohms. Shares its jacks with the composite Video 1 input. +
Composite is fed to the Y jack of the component trio; the on-screen label switches between Component and Video 1. +
Do not connect S-Video and composite to Input 2 at the same time; signal interference will result. +
181-channel capability: 12 VHF, 56 UHF, 113 cable. +
Y at 1 Vp-p and C at 0.286 Vp-p, 75 ohms. Shares audio jacks with the L1 composite input. +
1 Vp-p into 75 ohms; audio 309 mVrms standard, 2 Vrms full scale, 22 kilohm input impedance. +
Shares audio jacks with the L2 composite input. +
75-ohm input feeding the single tuner shared by both decks; VHF 2-13, UHF 14-69 and CATV 5A/A-5 to EEE. +
PAL-I push-button tuner input +
S-Video/Composite SCART +
RGB input/output capable SCART +
UHF/VHF tuner input +
Front panel also carries a headphone jack. +
Antenna or cable input; also feeds the built-in FM radio tuner. +
Side panel S-Video input. Shares audio jacks with the composite input. +
