This is a property of type Text.

Showing 20 pages using this property.
S
R/R-Y, G/Y and B/B-Y BNCs at 0.7 Vp-p. With EXT SYNC off the monitor locks to sync on the green channel (0.3 Vp-p, negative).  +
Composite sync is supplied on the separate EXT SYNC IN BNC (4 Vp-p, negative) with the EXT SYNC selector on.  +
Sony 8-pin VTR connector carrying composite video and audio on one cable, in parallel with LINE B. Sony offered the VMC-3P, -5P and -10P cables for it.  +
Composite 1 Vp-p ±6 dB, sync negative, unbalanced, switchable between 75 ohms and high impedance. Audio is −5 dBs at high impedance. Loop-through to LINE A VIDEO OUT / AUDIO OUT.  +
Identical to LINE A, and wired in parallel with the VTR connector — the two must not be used simultaneously.  +
Analog mode, selected by the connector's mode pin. R, G and B at 0.7 Vp-p into 75 ohms without sync, or 1 Vp-p with sync on green as set by the rear SYNC ON GREEN switch; alternatively 1 Vp-p negative composite sync on the sync pin.  +
Composite 1 Vp-p ±6 dB, sync negative, with switchable 75-ohm termination. Audio is −5 dBs at high impedance. Loop-through to LINE A VIDEO OUT / AUDIO OUT.  +
Composite 1 Vp-p ±6 dB, sync negative.  +
Y at 1 Vp-p into 75 ohms unbalanced with negative sync; C at 0.286 Vp-p burst into 75 ohms.  +
Digital mode on the same 25-pin connector, with a further pin selecting IBM-style signalling or 3-bit TTL. Sync is TTL level.  +
Sony 8-pin VTR connector carrying composite video at 1 Vp-p ±6 dB, 75 ohms terminated, plus audio at −5 dBs.  +
1.0 Vp-p +3/-6 dB, sync negative, loop-through with automatic 75-ohm termination.  +
1.0 Vp-p, sync negative, loop-through with automatic 75-ohm termination.  +
R/R-Y, G/Y and B/B-Y at 0.7 Vp-p +3/-6 dB with 0.3 Vp-p sync on green.  +
Sync is supplied on the external sync BNC — 4.0 Vp-p ±6 dB composite, or 0.6 Vp-p ±6 dB tri-level.  +
Loop-through with automatic 75-ohm termination. Takes priority over the Line A composite input when both are connected.  +
R-Y/Y/B-Y on the same BNC trio as RGB. Component needs a service-menu phase adjustment on the Pr channel.  +
1 Vp-p ±6 dB, negative sync. Loop-through with automatic 75-ohm termination.  +
Y at 1 Vp-p negative sync into 75 ohms; chroma 286 mVp-p (NTSC) or 300 mVp-p (PAL) burst, Y-to-C delay within ±100 ns. Shares the LINE A audio jack.  +
0.7 Vp-p ±6 dB referenced to a 75% chrominance standard colour bar signal, on the same three BNCs as the analog RGB input.  +
MediaWiki Appliance - Powered by TurnKey Linux