Property:Input notes
This is a property of type Text.
S
Monitor section A/V input +
Monitor section BNC video input +
Built-in telescopic rod aerial covering US VHF and UHF. +
Built-in telescopic rod aerial covering US VHF and UHF. +
Lets the set be used as a small composite monitor. +
Sync on Green via 5 BNC input card. +
Removable input card with 5 BNC connectors (R, G, B, H/V). Accepts CSync at TTL or 75 ohm levels. +
5 BNC connectors. Accepts H/V sync at TTL or 75 ohm levels. +
Removable input card. Accepts 75 ohm CSync. Also accepts TTL-level H/V sync (RGBHV). +
Digital TTL RGB via the same DB-9 input card as analog RGB A. +
Active input is selected via front panel buttons (LINE A, LINE B, RGB A). +
HDVS analog HD signal (G, B, R/Y, Pb, Pr); BNC × 6 total (3 in + 3 loop-through out) +
HDVS analog HD signal (G, B, R/Y, Pb, Pr); BNC × 6 total (3 in + 3 loop-through out) +
HDVS analog HD signal (G, B, R/Y, Pb, Pr); BNC × 6 total (3 in + 3 loop-through out) +
HDVS analog HD signal (G, B, R/Y, Pb, Pr); BNC × 6 total (3 in + 3 loop-through out) +
Analog audio input jacks provided for HDMI connection +
Three composite inputs, one of them on the front panel. 1 Vp-p into 75 ohms unbalanced, sync negative; audio 500 mV RMS at 100% modulation into 47 kilohms. +
Accepts 1080i, 720p, 480p and 480i video with two-channel linear PCM audio at 32, 44.1 and 48 kHz in 16, 20 or 24 bits. +
Y at 1.0 Vp-p into 75 ohms unbalanced with negative sync; P<sub>B</sub> and P<sub>R</sub> at 0.7 Vp-p into 75 ohms. +
75-ohm external terminal feeding the NTSC, ATSC 8VSB and cable QAM tuners. +
