Property:Has input notes
This is a property of type Text.
J
BNC in + loop-through with 75-ohm termination switch +
Non-composite analog R/G/B on 3× BNC with loop-through. Requires external sync (separate BNC connector). +
Loop-through with 75Ω termination. Switchable from front panel or remote. +
External sync reference input. Loop-through with 75Ω termination. Accepts composite sync or blackburst. +
Loop-through with 75Ω termination. Switchable from front panel or remote. +
Selectable between RGB (R/G/B) and Component (Y/R-Y/B-Y) modes. Loop-through with switchable 75Ω termination. +
8-pin VTR connector. +
Loop-through with switchable 75Ω termination. +
Loop-through with switchable 75Ω termination. +
Y/C 3.58 input. Loop-through with switchable 75Ω termination. +
1.0Vp-p, bridged output possible. 8-pin VTR connector. One of two composite inputs. +
1.0Vp-p, bridged output possible. One of two composite inputs. +
External sync reference. 1-4Vp-p, bridged output possible. Sync on green also supported. +
0.7Vp-p per channel. Bridged output possible. Selectable via RGB select switch (TTL/Analog). +
Y/R-Y/B-Y component video on BNC. +
Compatible with IBM PC CGA 8/16 color mode. Selectable via RGB select switch (TTL/Analog). +
L
Balanced/unbalanced on barrier strip terminal blocks. DPS-475AV only. +24 dBu max, 600Ω or 18kΩ impedance. +
3× BNC (Y/R-Y/B-Y). Y: 1V p-p, R-Y/B-Y: 0.7V p-p, 75Ω +
Y: 1V p-p, C: 286mV burst (NTSC), 75Ω +
1V p-p, 75Ω +
