Sharp 12P-26: Difference between revisions

Revision as of 14:37, 24 August 2026

<ul><li>"/32in" is not declared as a valid unit of measurement for this property.</li> <li>"/64in" is not declared as a valid unit of measurement for this property.</li> <li>"/8in" is not declared as a valid unit of measurement for this property.</li></ul>

Description

The Sharp 12P-26 is a 12-inch solid-state portable black-and-white television.^[1] It operates from 220 V, 50 Hz AC mains or a 12 V DC supply, making it suitable for portable use. The set uses a monochrome picture tube (single-cathode CRT with a centering magnet) and receives CCIR System B (VHF) and System G (UHF) broadcasts.

Specifications

Power supply: 220 V, 50 Hz AC, or 12 V DC^[1]
Power consumption: 36 W (AC) / 16 W (12 V DC)^[1]
Reception: VHF channels 2–12, UHF channels 21–69^[1]
Intermediate frequency: picture 38.9 MHz, sound 33.4 MHz (intercarrier sound system)^[1]
Antenna input impedance: 75 Ω unbalanced^[1]
Speaker: 8 cm round, 32 Ω^[1]
Dimensions: approx. 15 63/64 in (W) × 11 25/32 in (H) × 11 5/8 in (D)^[1]
Weight: 17.2 lb^[1]

References

↑ ^1.0 ^1.1 ^1.2 ^1.3 ^1.4 ^1.5 ^1.6 ^1.7 ^1.8 Sharp 12P-26 Solid State Portable TV service manual (ISS16). Archived at https://archive.org/details/manualslib-id-4153451

[sm-1] 1.0 ^1.1 ^1.2 ^1.3 ^1.4 ^1.5 ^1.6 ^1.7 ^1.8 Sharp 12P-26 Solid State Portable TV service manual (ISS16). Archived at https://archive.org/details/manualslib-id-4153451

[1]

@@ Line 1: / Line 1: @@
-The '''Sharp 12P-26''' is a 12-inch solid-state portable television.
 {{CRT model
 |brand=Sharp
@@ Line 11: / Line 9: @@
 |frequency=50Hz
 |power_max=36
-|speaker_type=Mono
+|height=11 25/32 in
-|height=11.78 in
+|width=15 63/64 in
-|width=15.98 in
+|depth=11 5/8 in
-|depth=11.63 in
 |weight=17.2 lb
 }}
+{{CRT input
+|signal=RF
+|connector=RF (Belling-Lee)
+|count=1
+|location=rear
+|notes=75 Ω unbalanced VHF/UHF aerial input (VHF ch 2–12, UHF ch 21–69, CCIR B/G)
+}}
+{{CRT voltage range
+|voltage_min=220
+|voltage_max=220
+}}
+== Description ==
+The Sharp 12P-26 is a 12-inch solid-state portable black-and-white television.<ref name="sm">Sharp 12P-26 Solid State Portable TV service manual (ISS16). Archived at https://archive.org/details/manualslib-id-4153451</ref> It operates from 220 V, 50 Hz AC mains or a 12 V DC supply, making it suitable for portable use. The set uses a monochrome picture tube (single-cathode CRT with a centering magnet) and receives CCIR System B (VHF) and System G (UHF) broadcasts.
 == Specifications ==
-The 12P-26 is a solid-state portable television that runs from either 220&nbsp;V 50&nbsp;Hz AC mains or a 12&nbsp;V DC supply, drawing about 36&nbsp;W. Its tuner covers VHF channels 2–12 and UHF channels 21–69 to the CCIR standard, with a 38.9&nbsp;MHz picture intermediate frequency, a 33.4&nbsp;MHz sound IF and 5.5&nbsp;MHz intercarrier sound, fed from a 75&nbsp;Ω unbalanced antenna input. Audio is reproduced through a single 8&nbsp;cm (32&nbsp;Ω) round speaker. The cabinet measures approximately 15.98&nbsp;in wide × 11.78&nbsp;in high × 11.63&nbsp;in deep and the set weighs 17.2&nbsp;lb.<ref name="sm">Sharp 12P-26 service manual, Internet Archive: https://archive.org/details/manualslib-id-3463701</ref>
+* Power supply: 220 V, 50 Hz AC, or 12 V DC<ref name="sm" />
+* Power consumption: 36 W (AC) / 16 W (12 V DC)<ref name="sm" />
+* Reception: VHF channels 2–12, UHF channels 21–69<ref name="sm" />
+* Intermediate frequency: picture 38.9 MHz, sound 33.4 MHz (intercarrier sound system)<ref name="sm" />
+* Antenna input impedance: 75 Ω unbalanced<ref name="sm" />
+* Speaker: 8 cm round, 32 Ω<ref name="sm" />
+* Dimensions: approx. 15 63/64 in (W) × 11 25/32 in (H) × 11 5/8 in (D)<ref name="sm" />
+* Weight: 17.2 lb<ref name="sm" />
 == References ==
 <references />
-{{CRT voltage range
+[[Category:Sharp CRT TVs]]
-|voltage_min=220
+[[Category:12 inch CRTs]]
-|voltage_max=220
+[[Category:Consumer CRT TVs]]
-}}
-[[Category:Sharp CRTs]]
-[[Category:12-inch CRTs]]