S-Video (Y/C)

Template:Set S-Video (Separate Video), also known as Y/C, is an analog video signal format that carries standard-definition video as two separate signals: luminance (Y, or brightness) and chrominance (C, or color). By keeping these two components on separate channels, S-Video avoids the cross-color and dot crawl artifacts inherent in composite video, delivering a noticeably cleaner and sharper picture. S-Video is commonly found on mid-range to high-end consumer CRT televisions from the late 1980s onward, and is widely regarded by retro gaming enthusiasts as a significant step up from composite.

History

The concept of separating luminance and chrominance for transport predates the formal S-Video standard. The Atari 800 home computer was the first widely available device to offer separate luma and chroma outputs, introduced in late 1979 via a 5-pin DIN connector. The Commodore 64, released in 1982, also offered separate Y/C signals through an 8-pin DIN connector, though the term "S-Video" had not yet been coined.

S-Video was formally introduced and widely popularized by JVC with the launch of the S-VHS (Super VHS) videocassette format in 1987. The S-VHS format recorded luminance and chrominance separately on tape and required a connection that could preserve this separation during playback, leading to the standardization of the 4-pin Mini-DIN-4 connector for S-Video.

Through the 1990s, S-Video became a common feature on higher-end consumer CRT televisions, DVD players, satellite receivers, camcorders, and video game consoles. In Europe, the SCART connector could carry S-Video signals (using pins originally allocated for RGB), though not all SCART-equipped devices supported this.

Signal Characteristics

S-Video separates the video signal into two channels:

• Y (Luminance) — carries the brightness information, including sync pulses. This signal is essentially the same as a black-and-white video signal and contains the full image detail.
• C (Chrominance) — carries the color information, modulated on a subcarrier at approximately 3.58 MHz (NTSC) or 4.43 MHz (PAL).

Because the luminance and chrominance signals travel on separate shielded conductors, the low-pass filtering required in composite video to prevent crosstalk between the two is unnecessary. This preserves more luminance bandwidth and eliminates the dot crawl and cross-color artifacts that are characteristic of composite video.

Both signals use 75Ω impedance, and each signal pin is paired with its own dedicated ground pin in the standard Mini-DIN-4 connector.

Specifications

Parameter	Value
Signal type	Analog video (two-channel)
Channels	2 (Y + C; audio requires separate connection)
Resolution	480i (NTSC) / 576i (PAL/SECAM)
Impedance	75Ω per channel
Color encoding	NTSC, PAL, or SECAM
Standard connector	4-pin Mini-DIN-4 (most common)
Alternative connectors	Dual BNC (Y and C), dual RCA, 7-pin locking DUB

Connectors

The 4-pin Mini-DIN-4 connector is the standard connector for S-Video in consumer equipment. Its pinout is:

Pin	Signal
1	GND (Y ground)
2	GND (C ground)
3	Y (Luminance)
4	C (Chrominance)

In professional and broadcast environments, S-Video is often carried over dual BNC connectors (one for Y, one for C), which provide more robust connections and are standard on S-VHS editing decks and patch panels. Some early Y/C monitors used dual RCA jacks switchable between composite and Y/C input. Professional S-VHS machines frequently use 7-pin locking DUB connectors.

Non-standard 7-pin, 8-pin, and 9-pin Mini-DIN connectors have been used on various computer graphics cards, sometimes carrying S-Video alongside composite or component video signals with proprietary pinouts.

Use on CRT Televisions

S-Video inputs became increasingly common on consumer CRT televisions from the late 1980s through the 2000s, typically appearing on mid-range and higher-end models. The input is usually a Mini-DIN-4 socket on the rear panel (and sometimes on a front A/V panel), labeled "S-Video" or "S".

S-Video is the highest-quality connection available on many consumer CRT sets that lack component inputs, making it an important option for retro gaming and home theater use. Game consoles that support S-Video output include the Super Nintendo (NTSC models), Nintendo 64, GameCube, PlayStation, PlayStation 2, Xbox, Sega Saturn, and Sega Dreamcast, among others.

For CRT enthusiasts and retro gamers, S-Video represents the practical "sweet spot" for many setups: it is widely supported by both televisions and source devices, provides a significant visual improvement over composite, and does not require hardware modification.

Quality Comparison

S-Video sits in the middle of the analog video quality hierarchy. In order of increasing quality:

1. RF — composite video modulated onto an RF carrier
2. Composite (CVBS) — luminance and chrominance combined on one channel
3. S-Video (Y/C) — luminance and chrominance on separate channels
4. Component (YPbPr) — luminance and two color-difference signals on three channels
5. RGB — red, green, and blue carried separately

The most visible improvement from composite to S-Video is the elimination of dot crawl along color transitions and the removal of cross-color rainbow patterns on fine detail. The improvement from S-Video to component or RGB is subtler but includes fuller color bandwidth and reduced color bleeding.

See Also

• Composite (CVBS) — Lower-quality single-channel analog video
• Component (YPbPr) — Higher-quality three-channel analog video
• Mini-DIN-4 — Standard connector for S-Video
• BNC — Professional connector, sometimes used for dual-BNC S-Video
• SCART — European multi-signal connector that can carry S-Video