JVC AV-27D303: Difference between revisions

Line 11:

|composite_input=Yes

|rf_input=Yes

|rgb_moddable=No

|rgb_mod_notes=Not readily RGB moddable due to chassis design. Component input provides very good quality with minimal gains from RGB mod.

|year_released=2002

|crt_database=https://crtdatabase.com/crts/jvc/jvc-av-27d303

|jvc_product_archive_intro=https://support.jvc.com/consumer/product.jsp?modelId=MODL026900

|jvc_product_archive_features=https://support.jvc.com/consumer/product.jsp?modelId=MODL026900&pathId=74&page=2&archive=true

}}

Line 61:

Line 66:

{{CRT input|signal=RF|connector=F connector|count=1|location=rear|notes=75Ω VHF/UHF antenna/cable input}}

{{CRT output|signal=Audio|connector=RCA|count=2|location=rear|notes=Fixed audio output L/R}}

== RGB Mod Information ==

This model '''cannot be easily RGB modded''' according to community reports. The chassis design is not readily compatible with RGB modification, and more importantly, the gains over the existing component input would be marginal due to this model year's very good component decoding. Since the AV-27D303 already includes high-quality component video inputs (YPbPr), it can display near-RGB quality video, making an RGB mod unnecessary for most users.

== Setup Tips ==

* If component video appears in black and white, access the setup menu and enable "V2 Component-In" for INPUT 2

* The default sharpness level is typically set too high, causing ringing artifacts. Adjust this in the user menu for optimal picture quality

* To disable vertical edge enhancement (which artificially boosts contrast on vertical transitions for composite and RF sources), set LYC02 to zero in the 3L Y / C sub-menu of the service menu

* The television includes I2C bus control for advanced service adjustments

* The front Input 3 jacks are located under the front panel door - pull to open

Line 74:

Line 84:

[[Category:CRTs with component input]]

[[Category:CRTs with S-Video]]

[[Category:CRTs that cannot be RGB modded]]

@@ Line 11: / Line 11: @@
 |composite_input=Yes
 |rf_input=Yes
+|rgb_moddable=No
+|rgb_mod_notes=Not readily RGB moddable due to chassis design. Component input provides very good quality with minimal gains from RGB mod.
 |year_released=2002
+|crt_database=https://crtdatabase.com/crts/jvc/jvc-av-27d303
+|jvc_product_archive_intro=https://support.jvc.com/consumer/product.jsp?modelId=MODL026900
+|jvc_product_archive_features=https://support.jvc.com/consumer/product.jsp?modelId=MODL026900&pathId=74&page=2&archive=true
 }}
@@ Line 61: / Line 66: @@
 {{CRT input|signal=RF|connector=F connector|count=1|location=rear|notes=75Ω VHF/UHF antenna/cable input}}
 {{CRT output|signal=Audio|connector=RCA|count=2|location=rear|notes=Fixed audio output L/R}}
+== RGB Mod Information ==
+This model '''cannot be easily RGB modded''' according to community reports. The chassis design is not readily compatible with RGB modification, and more importantly, the gains over the existing component input would be marginal due to this model year's very good component decoding. Since the AV-27D303 already includes high-quality component video inputs (YPbPr), it can display near-RGB quality video, making an RGB mod unnecessary for most users.
 == Setup Tips ==
 * If component video appears in black and white, access the setup menu and enable "V2 Component-In" for INPUT 2
+* The default sharpness level is typically set too high, causing ringing artifacts. Adjust this in the user menu for optimal picture quality
+* To disable vertical edge enhancement (which artificially boosts contrast on vertical transitions for composite and RF sources), set LYC02 to zero in the 3L Y / C sub-menu of the service menu
 * The television includes I2C bus control for advanced service adjustments
 * The front Input 3 jacks are located under the front panel door - pull to open
@@ Line 74: / Line 84: @@
 [[Category:CRTs with component input]]
 [[Category:CRTs with S-Video]]
+[[Category:CRTs that cannot be RGB modded]]