Sony KV-24FV300: Difference between revisions
Created page with "{{CRT model |brand=Sony |model_code=KV-24FV300 |crt_type=TV |image_main=Sony kv24fv300.jpg |screen_size_in=24 |aspect_ratio=4:3 }} {{CRT link |link_type=Database |link_source=CRT Database |link_url=https://crtdatabase.com/crts/sony/sony-kv-24fv300 }}" |
No edit summary Tag: Manual revert |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
|screen_size_in=24 | |screen_size_in=24 | ||
|aspect_ratio=4:3 | |aspect_ratio=4:3 | ||
|chassis=BA-6 | |||
|remote_control=Sony RM-Y180 | |||
}} | }} | ||
{{CRT link | {{CRT link | ||
| Line 12: | Line 14: | ||
|link_url=https://crtdatabase.com/crts/sony/sony-kv-24fv300 | |link_url=https://crtdatabase.com/crts/sony/sony-kv-24fv300 | ||
}} | }} | ||
{{CRT mod | |||
|mod_type=RGB | |||
|mod_feasible=No | |||
|mod_url=https://sector.sunthar.com/guides/crt-rgb-mod/not-moddable.html#sony | |||
}} | |||
{{BA-6 Service Mode}} | |||
Latest revision as of 00:30, 28 December 2025
- ✗ RGB (not possible)
Service Mode
Entering Service Mode
To enter service mode, follow this sequence while the TV is in standby (power off):
- Press DISPLAY on the remote
- Press 5 on the remote
- Press VOLUME + on the remote
- Press POWER on the remote
Each button must be pressed within one second of the previous button. The service mode display will appear on screen showing adjustment categories and values.
Important Notes
- Always record original values before making changes
- Only adjust settings if you understand their function
- Some adjustments are critical for proper operation and safety
- After replacing certain components (especially deflection or high voltage related), specific adjustments must be performed
- The service mode is separate from the self-diagnostic mode
Service Mode Display
When service mode is active, the screen displays:
- Mode - Current adjustment mode (e.g., \"service\")
- Category - Current category (e.g., \"defl\", \"video\", \"audio\")
- Item - Current adjustment item name
- Item Data - Current value for the selected item
- Signal Type - Current video signal type (e.g., \"ntsc\")
Remote Control Functions
- 1 or 4 - Select different adjustment items (move up/down through items)
- 3 or 6 - Change the data value (increase/decrease the current value)
- MUTING then ENTER - Save changes to memory (LED turns green then red)
- 8 then ENTER - Initialize/reset current category to default values
- 0 - Not used for service adjustments
- POWER (off then on) - Exit service mode
Memory Operations
Saving Adjustments
After making any adjustment:
- Press MUTING (the status indicator will turn green)
- Press ENTER (the indicator will turn red confirming the write)
The display will show \"write\" when the memory operation is in progress.
Initializing Settings
To reset a category to factory defaults:
- Navigate to the desired category
- Press 8
- Press ENTER
This should be done when adjusting IDs 0-6 or when replacing IC002 (memory chip).
Verifying Saved Settings
To confirm adjustments were saved properly:
- Unplug the AC power cord
- Plug the power cord back in
- Re-enter service mode
- Navigate to the adjusted items to verify the values were retained
Exiting Service Mode
Turn off the TV using the power button on either the remote control or the main unit. The TV will exit service mode and return to normal operation.
Adjustment Categories
The service mode contains multiple categories of adjustments:
- DEF (Deflection) - Geometry adjustments (H/V size, position, linearity, etc.)
- 16:9 - Wide mode adjustments
- VP1 - Video processor settings (color, brightness, contrast, sharpness, AKB)
- VP2 - Additional video processing (VM, color killer, aperture, gamma)
- VIVID/STD/MOVIE/SPORTS - Picture mode presets
- Y - Y/C separation settings
- C - Chroma decoder settings
- RGB - RGB drive and cutoff adjustments
- DEFD - Additional deflection parameters
- OTHER - Miscellaneous settings
- OSD - On-screen display settings
- S/W AKB - Software auto kinescope bias
- AUDIO - Audio processor settings
- MICRO - Microprocessor settings
- FEATURE - Feature ID settings
Self-Diagnostic Mode
The unit also has a separate self-diagnostic function (see the Self-Diagnostic section for details on accessing error codes and diagnostic information).
Related Adjustments
For specific adjustment procedures (white balance, geometry, focus, etc.), refer to the service manual sections on set-up adjustments and circuit adjustments.
