Sony PVM-14M2E

Sony PVM-14M2E

CRT › Professional monitor

Overview

Brand

Sony

Model

PVM-14M2E

Market

Europe

Series

PVM

Type

Professional monitor

Screen size

14″

Aspect ratio

4:3

TVL

600

Chassis

SCC-G62H-A

ECID

EC5209

Tube

Mask

Aperture grille

Phosphors

P-22

Dimensions

H × W × D

34.0 cm × 34.6 cm × 43.1 cm

Weight

36.817 lb16.7 kg <br /> / 16.7 kg36.817 lb <br />

Speakers

Type

Mono

Power

0.8W

Power

Voltage

100–240V

Frequency

50Hz,60Hz

Consumption

90W (avg)

TV Systems

AV system

NTSC, NTSC 4.43, PAL, SECAM

Inputs

Rear

LINE B
1×Composite (CVBS) (BNC, Mono audio via RCA (connector))

1 Vp-p ±6 dB, sync negative, automatic 75-ohm termination. Loop-through to LINE B VIDEO OUT / AUDIO OUT.

LINE C
1×S-Video (Y/C) (Mini-DIN-4, Mono audio via RCA (connector))

Loop-through to the LINE C Y/C OUT and AUDIO OUT.

RGB/COMPONENT
1×Component (YPbPr) (BNC, Mono audio, audio shared w/ RGB/COMPONENT)

Y at 0.7 Vp-p ±6 dB and R-Y / B-Y at 0.7 Vp-p ±6 dB (75% chrominance colour bars) on the same three BNCs as the analog RGB input, selected by the RGB/COMPONENT switch.

RGB/COMPONENT
1×RGsB (BNC, Mono audio via RCA (connector))

R, G and B at 0.7 Vp-p ±6 dB on three loop-through BNCs shared with the component input; sync on green is 0.3 Vp-p negative, or an external sync generator can be used through EXT SYNC IN. Automatic 75-ohm termination.

LINE A
1×Composite (CVBS) (BNC, Mono audio via RCA (connector))

1 Vp-p ±6 dB, sync negative, automatic 75-ohm termination. Audio input is −5 dBu into more than 47 kilohms. Loop-through to LINE A VIDEO OUT / AUDIO OUT.

Outputs

Rear

RGB/COMPONENT OUT
1×RGsB (BNC)

Three loop-through BNCs carrying whichever of the analog RGB or component signals is fed to the inputs.

LINE A VIDEO OUT
1×Composite (CVBS) (BNC)

Loop-through of LINE A VIDEO IN with automatic 75-ohm termination.

LINE C Y/C OUT
1×S-Video (Y/C) (Mini-DIN-4)

Loop-through of the LINE C Y/C input.

LINE A AUDIO OUT
1×Analog mono (RCA (connector))

Loop-through of LINE A AUDIO IN.

LINE B VIDEO OUT
1×Composite (CVBS) (BNC)

Loop-through of LINE B VIDEO IN with automatic 75-ohm termination.

LINE B AUDIO OUT
1×Analog mono (RCA (connector))

Loop-through of LINE B AUDIO IN.

Accessories

Add accessory

Parts

Add part

Documents

• Sony PVM-14M2U/14M4U/14M2E/14M4E/14M2A/14M4A Service Manual (SP0401)

Add document

Contribute

Edit this data

The Sony PVM-14M2E is a 14-inch multiformat Trinitron professional video monitor and the AEP (European) member of Sony's M-series, built on chassis SCC-G62H-A. It is the standard-resolution model of the pair sold alongside the 800-line PVM-14M4E, which uses the same cabinet and connector panel but an HR Trinitron tube and SMPTE-C or EBU phosphors.

The 14M2E's Trinitron tube carries P-22 phosphors and resolves more than 600 TV lines at the centre of the picture. Colour temperature is switchable between D65 and D93, plus a USER setting adjustable from 3,200 K to 10,000 K; the factory setting is D65. Video bandwidth is 10 MHz ±3 dB on both the line (Y) and RGB paths, with aperture correction adjustable from 0 dB to +6 dB and an AFC time constant of 1.0 ms. Normal scan is 7% overscan and the underscan mode gives 5% underscan of the CRT effective screen area. Convergence is specified at 0.4 mm in the central area and 0.5 mm at the periphery, with high-voltage regulation of 3.5%.

Features

The monitor accepts NTSC, PAL, SECAM and NTSC 4.43 and selects the appropriate colour system automatically. A comb filter engages on NTSC composite input for more accurate Y/C separation, reducing cross-colour and cross-luminance, and a beam-current feedback circuit holds white balance stable as the tube ages.

Service functions include an underscan mode — during which dark RGB scanning lines from an internal test signal may appear along the top edge — a horizontal/vertical delay mode that exposes both sync intervals at once, and a blue-only mode that drives all three cathodes from the blue signal for chroma and phase adjustment.

The BNC inputs marked with the loop-through symbol terminate internally into 75 ohms and release the termination automatically when a cable is connected to the matching output. A 20-pin parallel REMOTE connector is fitted for external control and tally, and a mating cable is supplied along with the AC power cord, AC plug holder and a tally label.

Unlike the 120 V-only PVM-14M2U sold in the USA and Canada, the European 14M2E has a universal 100–240 V AC supply.