Sony PVM-2030
1×S-Video (Y/C) (Mini-DIN-4, Stereo audio via RCA (connector))
1×RGBHV (DB-25, Mono audio via DB-25)
1×RGBS (DB-25, Mono audio via DB-25)
1×TTL RGB (DB-25, Mono audio via DB-25)
1×Composite (CVBS) (EIAJ-8, Stereo audio via EIAJ-8)
1×Composite (CVBS) (BNC, Stereo audio via RCA (connector))
1×Composite (CVBS) (BNC, Stereo audio via RCA (connector))
The Sony PVM-2030 is a 20-inch NTSC Trinitron professional video monitor, the smaller of a pair with the 25-inch PVM-2530; the two share a single operating manual and differ only in tube size and audio power.[1] US and Canadian sets carry chassis number SCC-A85A-A.[2] Its original list price was around $1,125.[3]
The picture tube is a fine-pitch Trinitron (Sony part A51JKQ10X) with an approximately 50.6 cm visible diagonal, 100-degree deflection and a 0.55 mm aperture grille pitch. Sony rated it at 560 TV lines from the video inputs and 640 × 200 dots — about 2,000 characters — from the RGB input, with a 9300 K colour temperature and a video bandwidth of 6 MHz (−3 dB) on composite and 10 MHz on RGB.[1] The line pull range is ±500 Hz horizontally and −8 Hz vertically, so the set is a fixed-frequency 15 kHz monitor rather than a multisync.[1]
Features
The monitor's headline feature is its CMPTR input, a 25-pin DB-25 "multi connector" that accepts either analog or digital RGB from a microcomputer.[1] Mode pins on the connector select between analog RGB (0.7 Vp-p, or 1 Vp-p with sync on green) and TTL-level digital RGB, and separately between IBM-style RGBI signalling and 3-bit TTL. Horizontal and vertical sync arrive on separate pins, but the horizontal pin also accepts composite sync. A blanking pin lets a composite source from LINE A/B or the VTR connector be superimposed over the computer picture.[1]
Sony also fitted the set with New Dynamic Color, which raises the apparent colour temperature without turning skin tones unnatural by controlling RGB amplitude, and a Colorpure comb filter to suppress cross-colour on composite sources.[1]
CONTROL S IN and OUT connectors allow several monitors and a VTR to be driven from a single RM-739 Remote Commander, which was supplied with the monitor. Rear-panel REMOTE CONTROL and MANUAL CONTROL switches independently enable or lock out the remote and the front-panel touch controls.[1][2]
There is no built-in loudspeaker. Rear SPEAKER L/R terminals drive external 8–16 Ω speakers at 7 W + 7 W; Sony offered the SS-X6A and APM-X5A speaker systems and the SU-539 and SU-541 stands as options.[1] A switched AC OUT socket supplies up to 100 W at 120 V for a connected computer.[1]
Not every production run received the S VIDEO connector, so an individual PVM-2030 may have only composite and RGB inputs.[3]
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Sony PVM-2030/PVM-2530 Operating Instructions, Sony Corporation. https://archive.org/details/sony_PVM-2030_2530_Operation_Instructions
- ↑ 2.0 2.1 Sony PVM-2030 Service Manual (First Edition), Sony Corporation. https://archive.org/details/sony-pvm-2030-service-manual-first-edition
- ↑ 3.0 3.1 Sony PVM-2030, CRT Database.