Arclight-MCP-Bot: Create PVM-6041QM from Sony service manual

2026-08-10T12:28:52Z

Create PVM-6041QM from Sony service manual

New page

{{CRT model
|brand=Sony
|model_code=PVM-6041QM
|market=Europe
|series=PVM
|crt_type=Professional monitor
|form_factor=Standard
|screen_size_in=6
|aspect_ratio=4:3
|tvl=250
|height=17.3 cm
|width=14.6 cm
|depth=35.25 cm
|weight=5.5 kg
|tube_type=Trinitron
|chassis=SCC-F09D-A
|mask_type=Aperture grille
|av_system=PAL,SECAM,NTSC,NTSC 4.43
|frequency=50Hz,60Hz
|power_avg=40
|speaker_type=Mono
|speaker_watts=0.5W
}}
The '''Sony PVM-6041QM''' is a 6-inch multistandard Trinitron professional video monitor for the European (AEP) market, built on chassis SCC-F09D-A. It is the smallest member of the 41QM family, sharing its circuit design and 352.5 mm depth with the 9-inch [[Sony PVM-9041QM|PVM-9041QM]] in a narrower cabinet.<ref name="sm">Sony PVM-6041QM Service Manual, Sony Corporation. https://archive.org/details/sony_PVM-6041QM_Service_Manual</ref>

Resolution is 250 TV lines and frequency response 6.0 MHz (−3.0 dB) at all inputs, with an AFC time constant of 1.0 ms and a fixed D65 colour temperature.<ref name="sm" /> Normal scan is 6% overscan with a 3% underscan mode. Linearity is better than 7.0% on both axes, convergence 0.50 mm in the central area and 0.60 mm at the periphery, and high-voltage regulation 3.0%.<ref name="sm" />

== Features ==

The monitor decodes PAL, SECAM, NTSC 3.58 and NTSC 4.43.<ref name="sm" /> Its connector panel is more compact than the 9-inch model's: there is a composite VIDEO IN with loop-through, an audio phono input, and three BNCs carrying either analog RGB with sync on green or Y/R-Y/B-Y component, but no Y/C input and no external sync connector.<ref name="sm" /> An 8-pin mini-DIN REMOTE connector provides external control.<ref name="sm" />

Power can come from 100–240 V AC at 50/60 Hz or from 12 V DC via a Sony NP-1A/NP-1B battery pack or an AC-500/AC-500CE adaptor, drawing 40 W either way, which suits the monitor to field use.<ref name="sm" /> Audio output level is 0.5 W.<ref name="sm" />

== References ==
<references />
{{CRT voltage range
|voltage_min=100
|voltage_max=240
}}
{{CRT input
|label=VIDEO IN
|signal=Composite (CVBS)
|connector=BNC
|count=1
|audio=Mono
|audio_connector=RCA (connector)
|location=rear
|notes=1 Vp-p ±6 dB, sync negative. Audio input is −5 dBs into less than 47 kilohms. Loop-through to VIDEO OUT / AUDIO OUT.
}}
{{CRT input
|label=R/R-Y, G/Y, B/B-Y
|signal=RGsB
|connector=BNC
|count=1
|audio=None
|sync=Sync on Green
|location=rear
|notes=Three BNCs at 0.7 Vp-p ±6 dB with sync on green at 0.3 Vp-p negative, 75 ohms terminated.
}}
{{CRT input
|label=R/R-Y, G/Y, B/B-Y
|signal=Component (YPbPr)
|connector=BNC
|count=1
|audio=None
|location=rear
|notes=Y, R-Y and B-Y at 0.7 Vp-p ±6 dB referenced to a 100% chrominance standard colour bar signal, sharing the analog RGB BNCs.
}}
{{CRT output
|label=VIDEO OUT
|output_type=Video
|signal=Composite (CVBS)
|connector=BNC
|count=1
|location=rear
|notes=Loop-through, 75 ohms terminated.
}}
{{CRT output
|label=AUDIO OUT
|output_type=Audio
|signal=Analog mono
|connector=RCA (connector)
|count=1
|location=rear
|notes=Loop-through of the AUDIO IN jack.
}}

Sony PVM-6041QM - Revision history

Arclight-MCP-Bot: Create PVM-6041QM from Sony service manual