Arclight-MCP-Bot: Add basic content for Mini-DIN-4 connector page (via update-page on MediaWiki MCP Server)

2026-02-10T17:51:55Z

Add basic content for Mini-DIN-4 connector page (via update-page on MediaWiki MCP Server)

← Older revision		Revision as of 17:51, 10 February 2026
Line 1:		Line 1:
			'''Mini-DIN-4''' is a 4-pin circular connector from the Mini-DIN connector family, most commonly associated with [[S-Video (Y/C)\|S-Video]] connections. It is the standard connector for carrying separate luminance (Y) and chrominance (C) video signals on consumer electronics including CRT televisions, VCRs, DVD players, game consoles, and computer graphics cards. The connector measures 9.5 mm in diameter and uses a keyed design that prevents mating with other Mini-DIN pin configurations.

			== History ==

			The Mini-DIN connector family was developed as a smaller alternative to the original 13.2 mm DIN connectors standardized by the Deutsches Institut für Normung (DIN), the German standards body. Mini-DIN connectors are specified in IEC 61076-4-106 and come in seven standard patterns with three to nine pins, each keyed so that different pin counts cannot be cross-mated.<ref name="wp-minidin">[https://en.wikipedia.org/wiki/Mini-DIN_connector "Mini-DIN connector"], Wikipedia.</ref>

			The 4-pin Mini-DIN variant gained widespread adoption in the late 1980s when JVC selected it as the standard connector for [[S-Video (Y/C)\|S-Video]] connections alongside the introduction of the S-VHS format in 1987. The same physical connector was also used for the Apple Desktop Bus (ADB) on Macintosh computers starting with the Apple IIGS in 1986, and the two cable types are physically interchangeable (though they carry completely different signals).<ref name="wp-minidin" />

			Throughout the 1990s and 2000s, the Mini-DIN-4 connector became ubiquitous on consumer A/V equipment as S-Video support spread to televisions, DVD players, satellite receivers, camcorders, and video game consoles.

			== Design ==

			The Mini-DIN-4 connector has a 9.5 mm diameter cylindrical metal shell with a plastic keying tab that ensures correct orientation and prevents insertion into sockets of other Mini-DIN configurations. The four pins are arranged in a square pattern, with each signal pin (Y and C) paired with its own dedicated ground pin.<ref name="wp-svideo">[https://en.wikipedia.org/wiki/S-Video "S-Video"], Wikipedia.</ref>

			The pins are relatively thin and delicate compared to larger connectors like [[BNC]] or [[RCA (connector)\|RCA]]. Bent pins are a common problem, particularly with frequent insertion and removal, and can result in loss of color (if the C pin is affected) or complete signal loss. A bent pin can sometimes be straightened carefully, but risks breaking off entirely.<ref name="wp-svideo" />

			== Pinout ==

			{\| class="wikitable"
			! Pin !! Signal !! Description
			\|-
			\| 1 \|\| GND \|\| Ground (Y/luminance)
			\|-
			\| 2 \|\| GND \|\| Ground (C/chrominance)
			\|-
			\| 3 \|\| Y \|\| Luminance (brightness + sync)
			\|-
			\| 4 \|\| C \|\| Chrominance (color)
			\|}

			Both the Y and C signals use 75Ω impedance.

			== Variants ==

			While the standard 4-pin Mini-DIN is by far the most common S-Video connector, several non-standard variants exist:

			* '''7-pin Mini-DIN''' — used on many PC graphics cards and some laptops. A 7-pin socket accepts a standard 4-pin S-Video plug, with the three extra pins variously carrying [[Composite (CVBS)\|composite video]], [[Component (YPbPr)\|component video]], or other signals depending on the manufacturer.<ref name="wp-minidin" />
			* '''8-pin Mini-DIN''' — used on some ATI Radeon graphics cards
			* '''9-pin Mini-DIN''' — used on graphics cards with both video input and output capability

			These non-standard connectors lack standardized pinouts and vary between manufacturers, often requiring proprietary breakout cables or adapters.

			== Use on CRT Equipment ==

			On CRT televisions, the Mini-DIN-4 socket is typically found on the rear panel (and sometimes on a front or side A/V panel), labeled "S-Video," "S-VHS," or simply "S." It provides a significant picture quality improvement over [[Composite (CVBS)\|composite video]] by keeping the luminance and chrominance signals separate, eliminating dot crawl and cross-color artifacts.

			The Mini-DIN-4 connector appears on CRT sets ranging from mid-range consumer televisions to professional monitors (though professional equipment more commonly uses dual [[BNC]] connectors for Y/C signals). It was a standard feature on most higher-end consumer CRT televisions manufactured from the early 1990s through the end of CRT production in the late 2000s.

			== See Also ==

			* [[S-Video (Y/C)]] — The signal format carried by Mini-DIN-4
			* [[BNC]] — Professional alternative for carrying S-Video as dual Y/C
			* [[RCA (connector)]] — Consumer connector for composite video and audio
			* [[Composite (CVBS)]] — Lower-quality video signal commonly compared to S-Video

			== References ==
			<references />

	[[Category:Connector types]]		[[Category:Connector types]]

Arclight: Created page with "Category:Connector types"

2025-12-15T13:47:07Z

Created page with "Category:Connector types"

New page

[[Category:Connector types]]

Mini-DIN-4 - Revision history

Arclight-MCP-Bot: Add basic content for Mini-DIN-4 connector page (via update-page on MediaWiki MCP Server)

Arclight: Created page with "Category:Connector types"