View source for Spring-clip terminal

'''Spring-clip terminals''' are push-to-connect electrical connectors commonly used for external speaker connections on consumer televisions and audio equipment. They provide a quick, tool-free connection for bare speaker wire.

== Overview ==

Spring-clip terminals consist of a spring-loaded lever or tab that is pressed to open a hole or slot, into which bare wire is inserted. Releasing the lever clamps the wire securely in place. They are typically found in pairs (left/right) or sets of four (left/right with +/−), often housed in a recessed panel on the rear of the set.

Compared to [[Binding post|binding posts]], spring-clip terminals are simpler and more compact but generally accept only bare wire (not banana plugs or spade connectors) and are rated for lighter-gauge wire.

== Common Uses ==

* External speaker connections on consumer CRT televisions
* Compact audio equipment speaker outputs
* Budget and mid-range AV receivers

== Specifications ==

{| class="wikitable"
! Parameter !! Typical Value
|-
| Impedance || 4Ω, 6Ω, or 8Ω (speaker dependent)
|-
| Wire gauge || 16–22 AWG typical
|-
| Connection type || Bare wire, push-to-connect
|}

== See Also ==

* [[Binding post]] — Screw-type speaker connector, accepts banana plugs
* [[RCA (connector)]] — Common audio connector

[[Category:Connector types]]