View source for Sony PVM-1354Q

{{CRT model
|brand=Sony
|model_code=PVM-1354Q
|market=USA
|series=PVM
|release_year=1994
|crt_type=Professional monitor
|form_factor=Standard
|screen_size_in=13
|aspect_ratio=4:3
|tvl=600
|height=34 cm
|width=34.6 cm
|depth=41.15 cm
|weight=16.7 kg
|tube_type=HR Trinitron
|tube=M34KBE20X
|mask_type=Aperture grille
|pitch=0.25
|phosphor_type=SMPTE-C
|deflection_angle=90
|speaker_type=Mono
|av_system=NTSC,NTSC 4.43,PAL,SECAM
|frequency=50Hz,60Hz
|power_avg=90
}}
The '''Sony PVM-1354Q''' is a 13-inch multi-standard professional video monitor introduced in 1994.<ref name="crtdb">[https://crtdatabase.com/crts/sony/sony-pvm-1354q Sony PVM-1354Q], CRT Database.</ref> It shares a manual and most of its design with the 19-inch [[Sony PVM-1954Q|PVM-1954Q]] and the lower-resolution 13-inch PVM-1351Q.<ref name="oi">Sony PVM-1954Q/PVM-1354Q/PVM-1351Q Operating Instructions, Sony Corporation. https://archive.org/details/sony_PVM-1954Q_1354Q_1351Q_Operating_Instructions.PDF</ref>

The monitor uses an HR (High Resolution) Trinitron tube — Sony part [[M34KBE20X]] with a 0.25 mm aperture grille pitch<ref name="crtdb" /> — rated at more than 600 TV lines at the centre of the picture and coated with SMPTE-C phosphor, making it suitable for critical colour work.<ref name="oi" /> Colour temperature offers two fixed presets plus a USER setting adjustable from 3200 K to 10000 K, factory set to 6500 K.<ref name="oi" /> Video bandwidth is 6.0 MHz (−3 dB) on the composite input and 10.0 MHz on RGB.<ref name="oi" />

Colour system selection is automatic across PAL, SECAM, NTSC and NTSC 4.43.<ref name="oi" /> An NTSC comb filter suppresses cross-colour, and a beam current feedback circuit holds white balance stable as content changes.<ref name="oi" />

The PVM-1354Q is generally regarded as the precursor to the M-series PVMs and is often preferred over them because its power supply is less failure-prone.<ref name="crtdb" />

== Features ==

Front-panel controls include blue-only mode for chroma and phase setup, underscan, horizontal/vertical delay for checking sync, an external sync selector, and automatic degaussing at power-on plus a manual DEGAUSS button.<ref name="oi" /> On-screen menus cover colour temperature, chroma setup and other adjustments in five languages.<ref name="oi" />

Every input is a loop-through pair. The 75-ohm termination on an input is applied internally and released automatically the moment a cable is plugged into the matching output connector, so no termination switches or plug-in terminators are needed.<ref name="oi" />

The RGB/COMPONENT BNC trio accepts either analog RGB or Betacam-style R-Y/Y/B-Y component signals, selected on the front panel. With the EXT SYNC selector off, the monitor syncs to the green/Y channel; with it on, it locks to a reference fed into the separate EXT SYNC IN connector.<ref name="oi" />

A 20-pin REMOTE connector drives the front-panel tally lamp from a control console or special-effects generator and can also carry a remote controller.<ref name="oi" /> An optional SDI kit adds a serial digital input, raising power consumption from about 90 W to about 99 W.<ref name="oi" /> With an MB-502B bracket the monitor mounts in a standard EIA 19-inch rack.<ref name="oi" />

== References ==
<references />
{{CRT voltage range
|voltage_min=120
|voltage_max=120
}}
{{CRT input
|label=LINE
|signal=Composite (CVBS)
|connector=BNC
|count=1
|audio=Mono
|audio_connector=RCA (connector)
|location=rear
|notes=Automatic 75-ohm termination, released when a cable is connected to the VIDEO OUT loop-through.
}}
{{CRT input
|label=LINE C
|signal=S-Video (Y/C)
|connector=Mini-DIN-4
|count=1
|audio=Mono
|audio_connector=RCA (connector)
|location=rear
|notes=Has its own AUDIO IN jack and Y/C loop-through output with automatic 75-ohm termination.
}}
{{CRT input
|label=RGB/COMPONENT
|signal=RGsB
|connector=BNC
|count=1
|audio=Mono
|audio_connector=RCA (connector)
|sync=Sync on Green
|location=rear
|notes=R/R-Y, G/Y and B/B-Y BNCs at 0.7 Vp-p. With EXT SYNC off the monitor locks to sync on the green channel (0.3 Vp-p, negative).
}}
{{CRT input
|label=RGB/COMPONENT
|signal=RGBS
|connector=BNC
|count=1
|audio=Mono
|audio_connector=RCA (connector)
|sync=CSYNC
|location=rear
|notes=Composite sync is supplied on the separate EXT SYNC IN BNC (4 Vp-p, negative) with the EXT SYNC selector on.
}}
{{CRT input
|label=RGB/COMPONENT
|signal=Component (YPbPr)
|connector=BNC
|count=1
|audio=Mono
|audio_connector=RCA (connector)
|location=rear
|notes=Betacam R-Y/Y/B-Y on the same BNC trio as RGB; the front panel selects between RGB and component.
}}
{{CRT output
|label=VIDEO OUT
|output_type=Video
|signal=Composite (CVBS)
|connector=BNC
|count=1
|location=rear
|notes=Loop-through of the LINE video input.
}}
{{CRT output
|label=Y/C OUT
|output_type=Video
|signal=S-Video (Y/C)
|connector=Mini-DIN-4
|count=1
|location=rear
|notes=Loop-through of the LINE C input.
}}
{{CRT output
|label=RGB/COMPONENT OUT
|output_type=Video
|signal=RGsB
|connector=BNC
|count=1
|location=rear
|notes=Loop-through of the R/R-Y, G/Y, B/B-Y inputs; carries component signals when the input is fed with them.
}}
{{CRT output
|label=AUDIO OUT
|output_type=Audio
|signal=Analog mono
|connector=RCA (connector)
|count=3
|location=rear
|notes=One loop-through audio output per input group (LINE, LINE C, RGB/COMPONENT).
}}
{{CRT link
|link_type=Database
|link_source=CRT Database
|link_url=https://crtdatabase.com/crts/sony/sony-pvm-1354q
}}