View source for HP mx704

{{CRT model
|brand=HP
|model_code=mx704
|crt_type=Computer monitor
|form_factor=Standard
|screen_size_in=17
|visible_diag=16
|aspect_ratio=4:3
|visible_w=312
|visible_h=234
|height=43.2 cm
|width=41.0 cm
|depth=44.2 cm
|weight=19 kg
|mask_type=Shadow mask
|pitch=0.25
|h_scan_min=30
|h_scan_max=70
|v_scan_min=50
|v_scan_max=140
|frequency=50Hz,60Hz
|power_max=100
}}
The '''HP mx704''' is a 17-inch multisync colour computer monitor from Hewlett-Packard, with a 16-inch (40.6 cm) viewable screen size and an anti-glare coating.<ref name="ref">HP mx704 Reference Guide, Technical Specifications appendix, Hewlett-Packard. https://archive.org/details/manualzilla-id-7030615</ref>

The tube uses a variable dot pitch of 0.25 to 0.28 mm — finer at the centre of the screen than at the edges. The default display area is 312 × 234 mm typical.<ref name="ref" />

Synchronisation covers 30 to 70 kHz horizontally and 50 to 140 Hz vertically with a maximum pixel clock of 110 MHz. Supported modes are 640 × 480 at 60, 75 and 85 Hz, 720 × 400 at 70 Hz, 800 × 600 at 75 and 85 Hz, 1024 × 768 at 75 and 85 Hz — HP's preferred user resolution being 1024 × 768 at 85 Hz — and a maximum of 1280 × 1024 at 60 Hz.<ref name="ref" />

== Features ==

Video input is analog RGB with separate TTL sync on a 15-pin D-sub connector, and the monitor supports Plug and Play.<ref name="ref" />

The power supply accepts 100 to 240 V AC at 50 or 60 Hz (±3 Hz) and consumes a maximum of 100 W; inrush current is 30 A at 120 V and 60 A at 220 V.<ref name="ref" /> The monitor measures at most 410 × 432 × 442 mm (W × H × D) with its attached base and weighs up to 19 kg. Selected models meet the TCO'99 and MPR II standards.<ref name="ref" />

== References ==
<references />
{{CRT voltage range
|voltage_min=100
|voltage_max=240
}}
{{CRT input
|label=Video
|signal=VGA (RGBHV)
|connector=DE-15 (VGA)
|count=1
|audio=None
|sync=HSYNC+VSYNC
|location=rear
|notes=15-pin D-sub carrying analog RGB with separate TTL sync.
}}